Mesh-Top Belt Conveyor provides a minimum “sheet-walk” handling surface for all types of previously hard-to-convey material. Also provides a work surface for oper- ators involved in Base Sheet Insertion, Load Preparation for Strapping, or Operator Crossings.
Conveyor is designed with close radius transitions to minimize the gap providing in- creased load stability during transition from the to standard Roller Conveyor.
Our Mesh-Top Belt Conveyor is able to handle micro-flute material with even “down- warp”. Drive is direct mounted to the center drive shaft and is located outboard the conveyor for access. Transition Plate when positioning one Mesh Conveyor to another.
| Unit Width | Full Width Belt MTC lbs./per linear foot | Split Belt MTC lbs./per linear foot | Sheet Inserter MTC lbs./per linear foot |
|---|---|---|---|
| 60” | 1,000 | 1,500 | 1,000 |
| 72” | 1,000 | 1,500 | 1,000 |
| 84” | 1,000 | 1,500 | 1,000 |
| 96” | 1,000 | 1,500 | 1,000 |
| 108” | 1,000 | 1,500 | 1,000 |
| 120” | 1,000 | 1,500 | 1,000 |
| Width | 60”-120” * |
|---|---|
| Lengths | 60”-129” * |
| Top of the Roller Height | 12” to 15” |
| Conveyor Speed | 45, 60 FPM ** |
| Control Voltage | 120v AC, 24v DC |
| Gearmotor Rating | 2 HP, 3 HP |
| Voltage | 380v, 460v, 575v |
