Product Information Request

I'm Interested In

Chain-Driven Live Roller Conveyor

Our standard Chain Driven Power Conveyor has rollers spaced on 4” centers and is used to ensure positive drive. A version of this unit is also commonly used for a Baler Discharge. The rollers are spaced on 6” centers to allow pieces of scrap that would usually get stuck in a standard Belt-Driven Conveyor, to fall thru the Conveyor onto the floor. CDLR is shown on a Transfer Car.



Drive: 1 hp totally enclosed industrial rated 1750 rpm gear-motor with reversing capability. Drive Package located within and under the device.

Chain Driven Rollers: Heavy Duty 3-1/2” diameter wall thickness Rollers spaced on either 4” or 6” centers.

  • Rollers include a 1” diameter C.R.S. shaft, mounted in a 2-hole flange bearing (re-greaseable).
  • Rollers are mounted in a 4” x 3” structural angle side frame.
  • Load rating is 750 lbs. per roller.
Standard Sizes Available
Roller Width 30″ 36″ 48″ 60″ 72″ 84″ 96″
OAW 42″ 48″ 60″ 72″ 84″ 96″ 108″
OAL Available in lengths from 3′ thru 10′

Speed: 30-60 fpm.

Preassembly: Unit is wired at the factory.

Unit Height: 12” TOR minimum with Leg Extensions available for other heights.

Capacity: 5,000 lbs. maximum.

Voltage:  System Voltage is 230/460 volt, 3 phase, 60 hertz with 115-volt AC or 24-volt DC control voltage. Other voltages available upon request.